Linux Blog

Bringing The Internet Up After Failure

Filed under: Shell Script Sundays — at 9:58 pm on Sunday, September 9, 2007

This Shell Script Sunday is a short one but don’t let that fool you to the power of the shell. This script I wrote earlier in the week due to power spikes at the office. All of our equipment would stay powered on due to UPS’s but unfortunately something with the ISP was not staying on. Once the brownout occurred our router box would still have an IP and seem to be working but it wouldn’t. We had our suspicions about what piece of equipment it was but had no power to fix it. I would renew the IP from the ISP bring the public interface down by using eth0 down and then eth0 up but this was not successful. To fix it from the router I had to actually reset the network. This worked, but we have some services running at the office that I like to access from home. So to fix the problem I wrote a one liner to reset the network if the connection goes down.

ping -c 1 2> /dev/null > /dev/null && echo > /dev/null || sudo /etc/rc.d/network restart

The techniques in this script are covered in Shell Scripting 101. All this does is ping one time and output the error & standard output to /dev/null. If the ping was successful it does nothing and if the ping failed then it restarts the network. To get it to repeat at an interval I just set it up as a cron job. This did the trick and I now do not have to worry about brownouts.