Linux Blog

My Linux Laptop – Toshiba Portege 4010

Filed under: Linux Hardware — TheLinuxBlog.com at 9:48 am on Monday, November 26, 2007

Linux Blog - Toshiba Portege 4010 Linux LaptopAlong with my desktop I also have a laptop that is in dire need of an upgrade. It is a Toshiba Portege 4010. Although its age and its specifications (or lack of) it is still a decent ultra portable laptop. The battery life is great (4-6 hours) and its very light weight. Here are the specs:

CPU: 933MHz Pentium M
Ram: 512MB Shared
HD: 100GB Seagate 5400RPM
Media: CD-RW/DVD Combo Drive.
Network: Integrated 10/100 & Orinoco B Wifi.

I like its slim line style and cool features like the SD Card Reader, Firewire, Infrared and Toshiba Select Bay. But unfortunately I’ve not been able to get the SD Card or Infrared to work. The video card is also lacking, its a Trident Cyberblade and it doesn’t have very good support. I have to run X in VESA frame buffer mode which isn’t as bad as it sounds but without tweaking it is unable to play DVD’s.

The Toshiba ACPI extras work really well in conjunction with fnfxd. Brightness, Volume, Screen Change and Lock Screen are the only short cuts I set up. The system also suspends to disk & ram with no problems.

I also run Slackware 12 on my laptop and have trimmed it down to boot Linux faster and provide better battery life. It boots to login in about 30 seconds. The picture above is a picture I took in the kitchen. The desktop is XFCE from Slackware-current, click on the image to view more photos of my Toshiba Portege 4010.

My Linux Desktop Machine

Filed under: Linux Hardware — TheLinuxBlog.com at 8:39 am on Saturday, November 24, 2007

Maybe its just me but I find it interesting to look at other peoples computer stuff so I’m going to take the time to write some blog posts about my hardware.

First in my lineup is my Desktop. This is by no means a new computer but runs very well.
CPU: AMD Athlon XP 2500+
Motherboard: MSI KT400
Memory: 512MB DDR 333
Hard Drive: 160GB Maxtor
Video Card: NVIDIA GeForce FX5200
Ethernet: ADMtek NC100 Network Everywhere 10/100
Media Devices: CD-RW, Floppy, ATA133 Hard Drive Bay
Monitor: LG 19″ Flat Panel. DVI, VGA, 1280×1024. 4ms 1400:1
Keyboard/Mouse: Generic Staples $10 special and a unknown brand painted laser mouse.

Every device is supported by the 2.6 kernel and Linux runs very well on it. The motherboard uses a VIA chip set and a C-Media audio device. The CPU is
actually 1875.733 MHz with a 512KB cache. According to cat /proc/cpuinfo it has a bogomips rating of 3754.8

Now comes the sensitive part, my distro of choice. For some this is a sour topic but I’ll just say that it doesn’t really matter to me. I run windows on it before and most Linux distributions out perform it out of the box (after installing video drivers.) I choose to run Slackware 12 on it because of the simplicity. It took a little while to configure it how I like but it turned out pretty well. I use slackpkg to keep it current.

I’ll be sure to post some pictures of the setup some time.

Thats about all I have to say about my desktop, if you have any questions or would like any additional information just give me an e-mail at: owen @ thelinuxblog.com

New Hardware Category Added

Filed under: Linux Hardware,The Linux Blog News — TheLinuxBlog.com at 6:45 pm on Friday, November 23, 2007

I’ve added a new category to The Linux Blog. It is called: “Linux hardware” Any posts I make that include a specific device or device setup will be found in this category. It will also be used to post news about upcoming devices, devices I wish I had and anything else related to hardware.
Now I have to do a pitch: If any readers have questions, cool new hardware, hardware to review or would like a showcase in The Linux Blog about their hardware please send an e-mail to me: owen @ thelinuxblog.com

Thats all for now folks!

« Previous Page