printftestSection: Svgalib User Manual (6)
Updated: 8 April 1997
Index Return to Main Contents
NAMEprintftest - tests the vgagl gl_printf function
printftest x y
DESCRIPTIONThis test utility reads keys from the keyboard and displays them on the screen at pixel position (x, y) using gl_printf(3). It must be linked with the ELF svgalib libraries.
You can set a videomode to use by setting the environment variable SVGALIB_DEFAULT_MODE to a number (see vgatest for a list) or a string like G0x1x2 where you replace 0 with desired x resolution, 1 with the desired y rez, and 2 with the desired number of colors (2, 16, 256, 32K, 64K, 16M, 16M4). Again, only certain choices are available, see vgatest for a list.
In case nothing is selected, G320x200x256 is choosen.
This demo is part of svgalib and can be found in the demos/ subdirectory of the original svgalib distribution. However, it is not installed in the system by default, s.t. it is unclear where you can find it if your svgalib was installed by some linux distribution. Even then, when you have the demo on your system, you probably won't have the sources s.t. it is only of limited use for you.
In case of any such problem, simply get an svgalib distribution from the net. You even don't need to install it. Just make in the demos/ subdirecty. As of this writing, svgalib-1.2.12.tar.gz is the latest version and can be retrieved by ftp from sunsite.unc.edu at /pub/Linux/libs/graphics and tsx-11.mit.edu at /pub/linux/sources/libs which will most probably be mirrored by a site close to you.
svgalib(7), vgagl(7), libvga.config(5), threed(6), accel(6), bg_test(6), eventtest(6), forktest(6), fun(6), mousetest(6), scrolltest(6), speedtest(6), spin(6), testaccel(6), testgl(6), testlinear(6), vgatest(6), plane(6), wrapdemo(6)
This manual page was edited by Michael Weller <firstname.lastname@example.org>. The exact source of the referenced demo as well as of the original documentation is unknown.
It is very likely that both are at least to some extent are due to Harm Hanemaayer <H.Hanemaayer@inter.nl.net>.
Occasionally this might be wrong. I hereby asked to be excused by the original author and will happily accept any additions or corrections to this first version of the svgalib manual.